Dell W12C Kullanıcı El Kitabı - Sayfa 11

Dizüstü Bilgisayar Dell W12C için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Dell W12C 49 sayfaları.
Ayrıca Dell W12C için: Kurulum ve Özellikler (25 sayfalar)

Sayfayı Yazdır
a.
stand
b.
back cover
3.
Pry the retention clips away from the memory module until it pops-up. Lift and remove the memory
module from its connector.

Installing the Memory module

NOTE: Please use DIMM 2 slot if there is only one memory module available.
1.
Align the notch on the memory module with the tab on the system-board connector.
2.
Press down on the memory module until the retention clip spring back to secure them in place.
3.
Install:
a.
back cover
b.
stand
4.
Follow the procedures in

Removing the Heatsink

1.
Follow the procedures in
2.
Remove:
a.
stand
b.
back cover
3.
Remove the screws that secure the heatsink to the system board [1,2,3,4,5,6,7].
NOTE: Loosen the screws in the order of the callout numbers [1, 2, 3, 4, 5, 6, 7]. Except for
screw [7], the rest of the screws are retention screws and cannot be fully removed.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
11