Dell XPS 13 Manuel - Sayfa 6

Dizüstü Bilgisayar Dell XPS 13 için çevrimiçi göz atın veya pdf Manuel indirin. Dell XPS 13 24 sayfaları. Re-imaging guide for microsoft windows
Ayrıca Dell XPS 13 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Teknik Özellikler (21 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kurulum ve Özellikler (23 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kurulum ve Özellikler (27 sayfalar), Kurulum ve Özellikler (19 sayfalar)

Sayfayı Yazdır
Dell XPS 13 Manuel

Introduction

Re-imaging is the process of removing all software on the computer and reinstalling
the removed software. Re-imaging is required when software in the computer is
corrupted or damaged and can also be used as a means of removing harmful and
malicious software in your computer. This re-imaging guide provides the steps
required for re-imaging your computer.
CAUTION: This re-imaging guide is designed for system administrators. Do
not attempt to re-image the system if you are not an administrator or are
unsure of the procedures. Failure to follow instructions may result in
permanent data loss.
NOTE: Information provided in this guide is applicable to computers with
Microsoft Windows only.
This guide assists you in installing Dell-recommended software stack and settings,
drivers, and applications, which are tested and validated on the XPS 13-9370. The
installation of the listed drivers and applications as described in the guide enhances
the optimal performance of your computer.
Dell also provides drivers and applications that are not included with the Windows
operating system. These drivers are required to enable the following Solid State Drives
(SSD):
•
128 GB SSD
•
256 GB PCIe SSD
•
512 GB PCIe SSD
•
1024 GB PCIe SSD
It is always recommended to re-image on a newly-installed operating system and not
from any previous image-build. Ensure BIOS settings, including SATA configurations
and modes, are appropriately set and the latest drivers and applications are used
when re-imaging the computer.
6