DH electronics 96Boards Avenger96 Başlarken - Sayfa 14
Anakart DH electronics 96Boards Avenger96 için çevrimiçi göz atın veya pdf Başlarken indirin. DH electronics 96Boards Avenger96 19 sayfaları.
Ayrıca DH electronics 96Boards Avenger96 için: Başlarken (14 sayfalar)
Sayfayı YazdırAvenger96 – Getting Started
DH electronics GmbH
1.2.3 Power Supply
The Avenger96 is designed to work with a standard 96Boards power connector which can be found on the
96Boards website:
https://www.96boards.org/product/power/
As an alternative to these power supplies you can also use any other power cord which has the same dimen-
sions like shown in picture above as long as it has an output voltage between 8 V to 18 V and provides a power
consumption of up to 24 W.
In case you just need the connector only, you can use a cable like this one:
https://www.arrow.de/products/053-0198r/tensility-international
However, the recommended power supply provides 12 V at a maximum output current of 2 A.
1.2.4 HDMI Display
The Avenger96 supports a resolution up to WXGA (1366 x 768) at a refresh rate of 60 fps.
Therefore, you can connect your Avenger96 to any HDMI display which supports such a resolution.
As an alternative, there is also a 7" HDMI display with a capacitive touch screen designed specific for the use
with a 96Boards:
https://www.arrow.de/products/96boards-display-7/linksprite-technologies-inc
R03
DOC_Getting-Started-588-200.docx
Page 14 / 19