Dell 2707WFP - UltraSharp - 27" LCD Monitor Kullanıcı Kılavuzu - Sayfa 46
Masaüstü Dell 2707WFP - UltraSharp - 27" LCD Monitor için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell 2707WFP - UltraSharp - 27" LCD Monitor 49 sayfaları. Flat panel monitor
Ayrıca Dell 2707WFP - UltraSharp - 27" LCD Monitor için: Kurulum Kılavuzu (2 sayfalar), Bilgi Formu (4 sayfalar)
Sayfayı Yazdır
Low Volume
Volume is too low.
Card Reader Troubleshooting
NOTICE:
Do not remove the device while reading or writing media. Doing so may cause loss of data or malfunction in the media.
Problem
Drive letter is not assigned.
(Windows XP only)
Drive letter is assigned, but the media
is not accessible
The media has been ejected during
writing or erasing.
Despite the disappearance of the
pop-up window, the media has been
ejected while the LED was blinking.
Cannot format or write on the media.
Back to Contents Page
Set all Windows audio balance controls (L-R) to their midpoints.
l
Clean and reseat the audio line-in plug.
l
Troubleshoot the computer's sound card.
l
Test the Soundbar using another audio source (i.e. portable CD player).
l
Clear any obstructions between the Soundbar and the user.
l
Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume setting.
l
Set all Windows volume controls to their maximum.
l
Increase the volume of the audio application.
l
Test the Soundbar using another audio source (i.e. portable CD player).
l
Cause
Conflict with network drive letter.
The media needs reformatting.
Displays the error message, "Error copying file or folder."
Displays the error message, "Cannot write folder (folder name) or
file (file name)," during writing, or, "Cannot remove folder (folder
name) or file(file name),". While erasing, you cannot write or erase
in the same folder or file name.
Although the pop-up window disappears during writing, if you eject
your media while the LED is still blinking, then you cannot complete
your action on the media.
Write protect switch is enabled.
Solution
A. Right-click My Computer on the desktop, and
then click Manage. Under Computer
Management, click Desk Management.
B. In the list of drives in the right panel, right-click
Removable Device and then click Change Drive
Letter and Paths.
C. Click Change, and in the drop-down box,
specify a drive letter for the Removable Device,
choosing one that is not assigned to the mapped
network drives.
D. Click OK, and then click OK again.
Right-click the drive in Explorer and choose Format
from the resulting menu.
Reinsert the media and write or erase again.
Format the media for writing or erasing the same
folder or file name.
Format the media for writing or erasing the same
folder or file name.
Verify that the write- protect switch of the media is
unlocked.