Dell 3008WFP - UltraSharp - 30" LCD Monitor Kullanıcı Kılavuzu - Sayfa 24

Masaüstü Dell 3008WFP - UltraSharp - 30" LCD Monitor için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell 3008WFP - UltraSharp - 30" LCD Monitor 38 sayfaları. Flat panel monitor
Ayrıca Dell 3008WFP - UltraSharp - 30" LCD Monitor için: Kurulum Kılavuzu (2 sayfalar), Teknik Özellikler (2 sayfalar), Broşür (2 sayfalar)

Sayfayı Yazdır

NOTE:

Push

Back

Use

Mode

PBP Source

Select an input signal for Picture by Picture (PBP). (DVI-1/DVI-2/HDMI/Composite/S-Video).

Use

Preset Modes You can choose different color presets for different viewing modes.

Desktop mode is for desktop applications. (DVI input source only.)

sRGB mode emulate 72% NTSC color. (DVI input source only.)

Movie mode is suitable for movie playback. (Video input sources only. HDMI/Composite /S-Video )

Nature mode is suitable for nature scenes. (Video input sources only. HDMI/Composite/S-Video )

Use

Contrast

Adjust the contrast level of the picture in Picture by Picture (PBP) Mode.

button reduce the contrast.

button increases the contrast.

NOTE:

Hue

This function shifts the color of Picture by Picture (PBP) image to green or purple. This is used to adjust for desired flesh tone color.

Use

makes video image shade into greenish.

makes video image shade into purplish.

NOTE:

Saturation

Adjust the color saturation of Picture by Picture (PBP) image.

Use

button makes the image look more monochrome.

button makes the image look more colorful.

NOTE:

Push

Exit Menu

OSD Warning Messagess

When the monitor does not support a particular resolution mode you will see the following message :

When using DVI source, the contrast adjustment is not available.

to go back to the main menu.

and

buttons to browse and

and

buttons to browse and

and

buttons to browse and

Contrast adjustment only available for video input.

and

buttons to adjust the hue from '0' to '100'.

Hue adjustment only available for video input.

and

buttons to adjust the saturation from '0' to '100'.

Saturation adjustment only available for video input.

to exit the OSD main menu.

to select Picture by Picture (PBP) "On" or "Off".

to select.

to select