Dell 7710 Hızlı Başlangıç Kılavuzu - Sayfa 3

Masaüstü Dell 7710 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dell 7710 9 sayfaları. Mobile precision workstation

Setting up Your Computer

This section provides information about setting up your Dell computer.

Before Setting up Your Computer

When positioning your computer, ensure that you allow easy access to a power source,

adequate ventilation, and a level surface to place your computer.

Restricting airflow around your computer may cause it to overheat. To prevent overheating

ensure that you leave at least 10.2 cm (4 inches) at the back of the computer and a minimum of

5.1 cm (2 inches) on all other sides. You should never place your computer in an enclosed

space, such as a cabinet or drawer when it is powered on.

WARNING: Do not block, push objects into, or allow dust to accumulate in the air vents.

Do not store your Dell™ computer in a low-airflow environment, such as a closed briefcase,

while it is powered on. Restricting the airflow can damage the computer or cause a fire. The

computer turns on the fan when the computer gets hot. Fan noise is normal and does not

indicate a problem with the fan or the computer.

CAUTION: Placing or stacking heavy or sharp objects on the computer may result in

permanent damage to the computer.

Icons, Status Lights and Indicators

Icons are used to label all connectors and buttons on Dell computers. Check the following table

for a description of those found on your computer.

2 |

P a g e

This document is for regulatory purpose only.

Power/battery status light – Indicates the power state and battery

status.

AC adapter connector - Connects to the AC adapter to power the

computer and charge the battery when the computer is not in use.

Battery status light – if the power status light does not provide

information on battery charge status, this light provides information

on charge status.

Wireless switch - used to either turn wireless communication on or

off.

-Or-

used to scan the local area for available wireless signals.

Network connector – Connects your computer to a network or a

broadband device if you are using a wired network.

VGA connector – Connects to a monitor or projector.

USB 2.0 connector – Connects to USB devices, such as a mouse,

keyboard, printer, external drive, or MP3 player.

Eject the disc