DH electronics 96Boards Avenger96 Başlarken - Sayfa 13

Bilgisayar Donanımı DH electronics 96Boards Avenger96 için çevrimiçi göz atın veya pdf Başlarken indirin. DH electronics 96Boards Avenger96 19 sayfaları.
Ayrıca DH electronics 96Boards Avenger96 için: Başlarken (14 sayfalar)

Sayfayı Yazdır

Avenger96 – Getting Started

1.2 Set Up Guide

This short guide leads you through the first steps to start exploring your Avenger96.

In the box you can find the Avenger96 which comes with a pre-installed linux on its eMMC storage as well as a

bootloader installed on the NOR-Flash. Unfortunately, the current version of the SoC can't boot directly from

the eMMC. In order to start the Avenger96 then, all you have to do is select the BOOT-Mode "NOR-Flash", which

loads the bootloader first. Once the bootloader is running, it starts up linux from the eMMC. This way you can

make use of the eMMC as a storage for your operating system.

1.2.1 Easy step by step guide

The board can be put in operation by following steps:

Make sure the boot switch is set to boot from the "NOR-Flash" (See chapter 1.2.2)

•

Connect a display via the HDMI-connector

•

Connect keyboard and mouse to the host USB ports

•

Connect a proper power supply (See chapter 1.2.3)

•

Plug the power supply into the power socket

1.2.2 Boot Mode

The Avenger96 supports multiple boot options which are selected by the DIP-

switch S3. To select a logical "1" a switch needs to be pushed to the right.

Therefore a logical "0" is set by pushing the switch to the left. The numera-

tion of these pins is printed next to the switch on the circuit board.

BOOT Mode

UART and USB

NOR-Flash

(Standard)

eMMC

(See „1.2 Set Up Guide")

NAND-Flash

(Not available)

Reserved (NoBoot)

SD-Card

UART and USB

Serial NAND Flash

(Not available)

R03

Comments

USB high-speed Device

On Quad SPI

On SDMMC2

SLC NAND Flash

Get boot access without boot

from Flash memory

On SDMMC1

USB OTG

NAND flash on Quad SPI

DOC_Getting-Started-588-200.docx

BOOT 2

BOOT 1

(Switch 3)

(Switch 2)

DH electronics GmbH

BOOT 0

(Switch 1)

Page 13 / 19