Dell D10U Kullanıcı El Kitabı - Sayfa 33
Masaüstü Dell D10U için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Dell D10U 38 sayfaları.
Ayrıca Dell D10U için: Servis Kılavuzu (20 sayfalar), Kullanıcı El Kitabı (50 sayfalar), Kurulum ve Özellikler (39 sayfalar), Kurulum ve Teknik Özellikler Kılavuzu (32 sayfalar), Kullanıcı El Kitabı (39 sayfalar), Kurulum ve Özellikler (37 sayfalar)
Sayfayı Yazdır
To enter the system setup, press F2 immediately after a power-on or re-boot.
1.
In the System BIOS or System Setup screen, select System Security and press Enter.
The System Security screen appears.
2.
In the System Security screen, verify that Password Status is Unlocked.
3.
Select System Password , enter your system password, and press Enter or Tab.
Use the following guidelines to assign the system password:
•
A password can have up to 32 characters.
•
The password can contain the numbers 0 through 9.
•
Only lower case letters are valid, upper case letters are not allowed.
•
Only the following special characters are allowed: space, ("), (+), (,), (-), (.), (/), (;), ([), (\), (]), (`).
Re-enter the system password when prompted.
4.
Type the system password that you entered earlier and click OK.
5.
Select Setup Password, type your system password and press Enter or Tab.
A message prompts you to re-type the setup password.
6.
Type the setup password that you entered earlier and click OK.
7.
Press Esc and a message prompts you to save the changes.
8.
Press Y to save the changes.
The computer reboots.
Deleting or changing an existing system and/or setup password
Ensure that the Password Status is Unlocked (in the System Setup) before attempting to delete or change the existing System
and/or Setup password. You cannot delete or change an existing System or Setup password, if the Password Status is Locked.
To enter the System Setup, press F2 immediately after a power-on or reboot.
1.
In the System BIOS or System Setup screen, select System Security and press Enter.
The System Security screen is displayed.
2.
In the System Security screen, verify that Password Status is Unlocked.
3.
Select System Password, alter or delete the existing system password and press Enter or Tab.
4.
Select Setup Password, alter or delete the existing setup password and press Enter or Tab.
NOTE: If you change the System and/or Setup password, re-enter the new password when promoted. If you delete
the System and/or Setup password, confirm the deletion when promoted.
5.
Press Esc and a message prompts you to save the changes.
6.
Press Y to save the changes and exit from System Setup.
The computer reboots.
33