Dell Dimension 2400 Series Manuel - Sayfa 33

Masaüstü Dell Dimension 2400 Series için çevrimiçi göz atın veya pdf Manuel indirin. Dell Dimension 2400 Series 43 sayfaları. Vga card installation instructions
Ayrıca Dell Dimension 2400 Series için: Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (8 sayfalar), Raf Kurulum Talimatları (32 sayfalar), Kurulum Talimatları (1 sayfalar)

Sayfayı Yazdır
Dell Dimension 2400 Series Manuel
Back to Contents Page
 
System Setup Program
Dell™ Dimension™ 2400 Series  
  Overview
  Entering the System Setup Program
  Clearing Forgotten Passwords
 
Overview
 
The system setup program contains the standard settings for your computer.
 
NOTICE:
Unless you are an expert computer user, do not change the settings for this program. Certain changes might make your computer work
incorrectly.
 
You can use the system setup program as follows:
 To change the system configuration information after you add, change, or remove any hardware in your computer
l
 To set or change user-selectable options—for example, the user password
l
 
Dell recommends that you write down the system setup program screen information for future reference.
 

Entering the System Setup Program

1.  Turn on (or restart) your computer.
2.  When F2 = Setup, F12 = Boot Menu appears in the upper-right corner of the screen, press <F12>.
 
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop. Then
computer
and try again.
 
See the following figure for an example of the main program screen.
 
shut down your