Dell Dimension 4700C Servis Kılavuzu - Sayfa 33
Masaüstü Dell Dimension 4700C için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell Dimension 4700C 42 sayfaları. Dell desktop computer quick setup guide
Ayrıca Dell Dimension 4700C için: Hızlı Kurulum Kılavuzu (2 sayfalar)
Drives
Identifies and defines the floppy drive attached to the FLOPPY connector on the system board as Off, USB, Internal, or Read Only.
Diskette Drive
Drives 0
Identifies the drives attached to the SATA or PRI IDE connectors on the system board, and lists the capacity for hard drives.
through 1
SATA Operation
Identifies and defines the SATA modes. You can set the SATA controller to Normal or Combo mode.
Onboard Devices
You can set the NIC to On (default), Off, or On w/ PXE. When the On w/ PXE setting is active (available only for the future boot
process), the computer prompts the user to press <Ctrl><Alt><b>. Pressing this key combination causes a menu to display that allows
NIC Controller
you to select a method for booting from a network server. If a boot routine is not available from the network server, the computer
attempts to boot from the next device in the boot sequence list.
Enables or disables the onboard modem.
Modem
1394 Controller Enables of disables the IEEE 1394 connections.
Enables or disables the optional Flash Card Reader.
Card Reader
Audio
Enables or disables the onboard audio controller.
Controller
Set to On (default) so that USB devices will be detected and supported in the operating system. The No Boot option enables a USB
USB Controller
controller, but does not recognize a USB storage device.
Identifies and defines the serial port settings. Auto (default) automatically configures a connector to a particular designation (COM1 or
COM3).
Serial Port
NOTE:
If both resources are in use, the port is disabled.
Video
Primary Video
This setting specifies which video controller is primary when two video controllers are present on the computer.
Video Memory
Use this option to select 8 MB (default) or 1 MB of system memory for an integrated video controller.
Size
Performance
If your computer's processor supports Hyper-Threading, this option appears in the Options List.
HyperThreading
Bypass — Your computer does not test or change the current acoustics mode setting.
l
Quiet (default) — The hard drive operates at its most quiet setting.
l
Suggested — The hard drive operates at the level suggested by the drive manufacturer.
l
Performance — The hard drive operates at its maximum speed.
l
HDD Acoustic
Mode
NOTE:
Switching to performance mode may cause the drive to be noisier, but its performance is not affected.
NOTE:
Changing the acoustics setting does not alter your hard drive image.
This section displays available system security options.
Security
Use this option with Admin Password to unlock setup options.
Unlock Setup
NOTE:
This option appears only when the Admin Password option is enabled.
This option provides restricted access to the computer's system setup program in the same way that access to the system can be
restricted with the System Password option.
Admin Password
NOTE:
To delete a password, enter the old password and press <Enter> two times.
System Password Displays the current status of the system's password security feature and allows a new system password to be assigned and verified.
Password
This option locks the system password field with the setup password. When the field is locked, you can no longer disable password
security by pressing <Ctrl><Enter> when the computer starts.
Changes
Power Management
Determines what happens when AC power is restored to the computer.
AC Recovery
Sets the computer to automatically turn on. Choices are every day or every Monday through Friday.
The default setting is Off.
Auto Power On
This feature does not work if you turn off your computer using a power strip or surge protector.
Sets time to automatically turn on the computer.
Time is kept in a 24-hour format (hours:minutes). Change the start-up time by pressing the right- or left-arrow key to increase or decrease
Auto Power Time
the numbers, or type numbers in both the date and time fields.
This feature does not work if you turn off your computer using a power strip or surge protector.
Use this mode to conserve power.
Low Power Mode
The options are S1, a suspend state where the computer is running in a low-power mode, and S3, a standby state where the power is
Suspend Mode
reduced or turned off for most components; however, system memory remains active.