Dell Dimension 5100 Servis Kılavuzu - Sayfa 32

Masaüstü Dell Dimension 5100 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell Dimension 5100 40 sayfaları. Setting up your computer
Ayrıca Dell Dimension 5100 için: Kurulum (2 sayfalar), Kurulum (2 sayfalar), Kurulum (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Back to Contents Page

Microprocessor Thermal-Cooling Assembly

Dell™ Inspiron™ 1100, 5100, and 5150 Service Manual

Removing the Microprocessor Thermal-Cooling Assembly

CAUTION:

your computer's electronic components. You can do so by touching an unpainted metal surface.

1. Follow the instructions in

2. Remove the keyboard.

3. Remove the

4. For the Inspiron 5150, remove the

5. Disconnect the fan power cable from the system board.

6. Loosen in consecutive order the four captive screws, labeled "1" through "4," that secure the microprocessor thermal-cooling assembly to the system

board.

1 captive screws (4)

2 fan power-cable

connector

7. Pull up the microprocessor thermal-cooling assembly by the pull-tab to lift the assembly out of the system board.

Installing the Microprocessor Thermal-Cooling Assembly

NOTICE:

assembly.

1. If you are installing a replacement microprocessor thermal-cooling assembly, remove the mylar that covers the thermal grease on the assembly. If you

are installing the assembly that you removed in the previous section:

a. Wipe the thermal grease off of the microprocessor thermal-cooling assembly with a clean paper towel.

b. Squeeze all of the contents of the thermal grease packet (provided with the kit) on to the microprocessor thermal-cooling assembly.

Great user manuals database on

Before performing the following procedures, read the safety instructions in your Owner's Manual.

To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of

"Preparing to Work Inside the

EMI

shield.

display panel

Before you install the replacement microprocessor thermal-cooling assembly, remove the mylar that covers the thermal grease on the

UserManuals.info

Computer."

and then remove the

palm

rest.