Dell OptiPlex 3020 Kullanıcı El Kitabı - Sayfa 36
Masaüstü Dell OptiPlex 3020 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Dell OptiPlex 3020 50 sayfaları. Small form factor
Ayrıca Dell OptiPlex 3020 için: Teknik Özellikler (3 sayfalar), Teknik El Kitabı (49 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Option
Fastboot
Table 8. Virtualization Support
Option
Virtualization
Table 9. Wireless
Option
Wireless Device Enable
Table 10. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
Table 11. Cloud Desktop
Option
Server Lookup Method
Server Name
Server IP Address
Server Port
Client Address Method
36
System setup
Description
•
Enable Keyboard Error Detection
Allows you to speed up the boot process by bypassing some compatibility steps.
The options are:
•
Minimal
•
Thorough - This option is selected by default.
•
Auto
Description
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the
additional hardware capabilities provided by Intel Virtualization technology.
•
Enable Intel Virtualization Technology - This option is enabled by
default.
Description
Allows enabling/disabling the internal wireless devices. The options are is
WLAN/WIGIG(enabled by default)
Description
Displays the service tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set. This
option is not set by default.
Controls the SERR message mechanism. This option is enabled by default.
Some graphics cards require that the SERR message mechanism be disabled.
•
Enable SERR Messages
Description
Specifies how the ImageServer looks up the server address.
•
Static IP
•
DNS (enabled by default)
NOTE:
This field is only relevant when the
System Configuration group is set to Enabled with ImageServer .
the
Displays the name of the server.
Displays the primary static IP address of the ImageServer with which the client
software communicates. The default IP address is 255.255.255.255.
NOTE:
This field is only relevant when the
System Configuration group is set to Enabled with ImageServer
the
Lookup Method is set to Static IP .
and when
Displays the primary IP port of the ImageServer, which is used by the client to
communicate. The default IP port is 06910.
NOTE:
This field is only relevant when the
System Configuration group is set to Enabled with ImageServer .
the
Specifies how the client obtains the IP address.
•
Static IP
Integrated NIC control in
Integrated NIC control in
Integrated NIC control in