EnStar ENMD Series Kullanıcı El Kitabı - Sayfa 18

Klima EnStar ENMD Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. EnStar ENMD Series 20 sayfaları.

5. WATER FILLING FEATURE

This machine is especially designed a water filling

function to improve the cooling efficiency. On cooling

operation, open the back cover and use a cup to fill

water into the unit. 1.5 leters of water filling should

be enough. We strongly recommend you not to

filling water on high humid days.

NOTE:

When the NO WATER FILLING indicator light

illuminates, it means stop filling water to the unit.

CARE AND MAINTENANCE

IMPORTANT:

1) Be sure to unplug the unit before cleaning or servicing.

2) Do not use gasoline, thinner or other chemicals to clean the unit.

3) Do not wash the unit directly under a tap or using a hose. It may

cause electrical danger.

4) If the power cord is damaged, it should be repaired by manufacture

or its agency.

1 AIR FILTER

Clean the air filter at least once every two weeks to

prevent inferior fan operation because of dust.

Removal

Pull out the filter cover and remove the air filter from the

filter cover.

Cleaning

Wash the air filter by immersing it gently in warm water

(about 40 C/104 F) with a neutral detergent. Rinse the

filter and dry it in a shady place.

Mounting

Attach the air filter to the filter cover using the attachment

hooks on the inner surface of the cover. Put the filter cover

back to the unit.

2 UNIT ENCLOSURE

Use a lint-free cloth soaked with neutral detergent to clean

the unit enclosure. Finished by a dry clean cloth.

3 UNIT IDLE FOR A LONG TIME

When you plan to leave this unit unused for a long time,

remove the bottom rubber plug from the back hole and

attach a section of the continuous drain hose .

All the water in the bottom tray would drain outside

through the drain hose.(See Fig.14)

CARE AND MAINTENANCE

Fig.11

Fig.12

Fig.13

Fig.14