Dell XPS 430 Servis Kılavuzu - Sayfa 16

Masaüstü Dell XPS 430 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell XPS 430 42 sayfaları. Dell xps computer setup
Ayrıca Dell XPS 430 için: Kurulum (2 sayfalar)

Sayfayı Yazdır

11. Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" in the Quick Reference Guide).

Replacing a Media Card Reader

NOTICE:

Carefully note the routing of each cable before you disconnect it, so that you are sure to re-route cables correctly. An incorrectly routed or a

disconnected cable could lead to computer problems.

1. Follow the procedures in

Before You

2. Remove the computer cover (see

3. Remove the drive panel (see

Media Card Reader (not present on all computers)

4. Disconnect the USB cable from the back of the Media Card Reader. Disconnect the other end of the cable from the USB connector (FLEXBAY) on the

system board (see

System Board

1 sliding plate 2 sliding plate lever

5. Pull the sliding plate towards the bottom of the system and hold; then, slide the drive out through the front of the computer.

6. If you are not reinstalling the Media Card Reader, replace the drive panel insert (see

NOTICE:

Ensure the FlexBay knob is turned in the anticlockwise direction, failing which can result in the knob being broken.

NOTE:

If you have already installed an additional hard drive in the FlexBay and you want to replace it with a Media Card Reader, ensure that the

FlexBay knob is rotated anticlockwise, back to its default vertical position. See the illustration for

7. If you are installing a new Media Card Reader:

a. Remove the drive panel insert (see

b. Remove the Media Card Reader from its packaging.

c. Remove the shoulder screws from the inside of the drive-panel insert and attach the screws to the new Media Card Reader.

Begin.

Removing the Computer

Cover).

Replacing the Drive

Panel).

Components).

3 Media Card Reader (not present on all computers)

Replacing the Drive-Panel

USB cable

Replacing the Drive-Panel

Installing a Hard Drive in the

Insert).

Insert) and go to

step

FlexBay.