Dell Dimension 2200 Manuel - Sayfa 9
Sunucu Dell Dimension 2200 için çevrimiçi göz atın veya pdf Manuel indirin. Dell Dimension 2200 50 sayfaları. Vga card installation instructions
Ayrıca Dell Dimension 2200 için: Değiştirme Kılavuzu (9 sayfalar), Kurulum Talimatları (1 sayfalar)
Sayfayı Yazdır
1.
Shut down the
computer.
2. Turn off any attached devices and disconnect them from their electrical outlets.
NOTICE:
To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.
3. Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board.
4.
Remove the computer
cover.
5. Lay the computer on its side as shown in the following illustration.
Press the release latch while lifting the power supply. Rotate the power supply out of the computer while keeping the drive power cables clear.
When you rotate the power supply back into the computer, gently lift the and hold the drive cables out of the way. Rotate the power supply into position until
its release latch clicks. Lay the drive power cables along the top of the latch.
Front Panel
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
1.
Shut down the
computer.
2. Turn off any attached devices and disconnect them from their electrical outlets.
NOTICE:
To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.
3. Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board.
4.
Remove the computer
cover.
"Safety
Instructions."