Dell Dimension 2400 Series Raf Kurulum Talimatları - Sayfa 28

Sunucu Dell Dimension 2400 Series için çevrimiçi göz atın veya pdf Raf Kurulum Talimatları indirin. Dell Dimension 2400 Series 32 sayfaları. Vga card installation instructions
Ayrıca Dell Dimension 2400 Series için: Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (8 sayfalar), Kurulum Talimatları (1 sayfalar), Manuel (43 sayfalar)

Sayfayı Yazdır
Dell Dimension 2400 Series Raf Kurulum Talimatları
1-16
Dell PowerEdge 2400 Systems Rack Installation Guide
6.
Press up on the green latches and push the chassis into the rack.
7 .
Tighten the thumbscrews on each rack adapter bracket.

Installing the Cable-Management Arm

To install the cable-management arm on the computer, perform the following steps:
1.
Secure the loose end of the cable-management arm to the back vertical rail as
shown in Figure 1-14.
Use one 10-32 x 0.5-inch Phillips-head screw to secure the cable-management
and template arm to the back vertical rail as shown in Figure 1-14. (This is the rail
on the right as you face the back of the rack.) Ensure that the cable-management
arm is straight in relation to the computer—that is, parallel to the ground.
8-32 x 0.313-inch
screws (2)
bracket

Figure 1-14. Installing the Cable-Management Arm

vertical rail
10-32 x 0.5-inch
screw
cable-management
arm
Velcro strip
back of computer