Dell EMC PowerEdge C6420 Referans Kılavuzu - Sayfa 10
Sunucu Dell EMC PowerEdge C6420 için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Dell EMC PowerEdge C6420 26 sayfaları.
Sayfayı Yazdır
Option
Description
Dell Controlled
Controls the turbo engagement. . This option is set to Disabled by default.
Turbo
Dell AVX Scaling
Enables you to configure the Dell AVX scaling technology. This option is set to 0 by default.
Technology
Number of Cores
Controls the number of enabled cores in each processor. This option is set to All by default.
per Processor
Processor Core
Specifies the maximum core frequency of the processor.
Speed
Processor n
The following settings are displayed for each processor that is installed in the system:
Option
Family-Model-
Stepping
Brand
Level 2 Cache
Level 3 Cache
Number of Cores Specifies the number of cores per processor.
Maximum
Memory Capacity
Microcode
SATA Settings
You can use the SATA Settings screen to view the settings of SATA devices and enable SATA and PCIe NVMe RAID mode on
your system.
Viewing SATA Settings
To view the SATA Settings screen, perform the following steps:
Steps
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click SATA Settings.
SATA Settings details
About this task
The SATA Settings screen details are explained as follows:
10
Pre-operating system management applications
NOTE:
Depending on the number of installed processors, there might be up to two processor listings.
NOTE:
Depending on the number of processors, there might be up to two processors listed.
Description
Specifies the family, model, and stepping of the processor as defined by Intel.
Specifies the brand name.
Specifies the total L2 cache.
Specifies the total L3 cache.
Specifies the maximum memory capacity per processor.
Specifies the microcode.