Dell EMC PowerEdge MX740c Referans Kılavuzu - Sayfa 27

Sunucu Dell EMC PowerEdge MX740c için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Dell EMC PowerEdge MX740c 29 sayfaları. Bios and uefi

For more information about using iDRAC, see Dell Integrated Dell Remote Access Controller User's Guide at

idracmanuals.

Device Settings

Device Settings enables you to configure the device parameters.

The Dell Lifecycle Controller (LC) provides advanced embedded systems management capabilities, including system deployment,

configuration, update, maintenance, and diagnosis. LC is delivered as part of the iDRAC out-of-band solution and Dell system

embedded Unified Extensible Firmware Interface (UEFI) applications.

The Dell Lifecycle Controller provides advanced embedded system management throughout the system's lifecycle. The Dell

Lifecycle Controller can be started during the boot sequence and can function independently of the operating system.

NOTE:

Certain platform configurations may not support the full set of features provided by the Dell Lifecycle Controller.

For more information about setting up the Dell Lifecycle Controller, configuring hardware and firmware, and deploying the

operating system, see the Dell Lifecycle Controller documentation at www.dell.com/idracmanuals.

The Boot Manager screen enables you to select boot options and diagnostic utilities.

Perform the following steps to enter the boot manager.

Steps

1. Turn on, or restart your system.

Enter the result of your step here (optional).

2. Press F11 when you see the following message:

F11 = Boot Manager

If your operating system begins to load before you press F11, allow the system to complete the booting, and then restart your

system and try again.

Menu item

Description

Continue Normal

The system attempts to boot to devices starting with the first item in the boot order. If the boot attempt

Boot

fails, the system continues with the next item in the boot order until the boot is successful or no more

boot options are found.

One-shot UEFI

Enables you to access the UEFI Boot menu and select an one-shot boot option to boot from.

Boot menu

Launch System

Enables you to access System Setup.

Setup

Pre-operating system management applications