Dell EMC PowerEdge MX840c Referans Kılavuzu - Sayfa 4

Sunucu Dell EMC PowerEdge MX840c için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Dell EMC PowerEdge MX840c 29 sayfaları.

You can manage basic settings and features of a system without booting to the operating system by using the system firmware.

Topics:

•

•

•

Dell Lifecycle Controller

•

Boot Manager

•

PXE boot

Options to manage the pre-operating system

applications

Your system has the following options to manage the pre-operating system applications:

● System Setup

● Dell Lifecycle Controller

● Boot Manager

● Preboot Execution Environment (PXE)

System Setup

By using the System Setup screen, you can configure the BIOS settings, iDRAC settings, and Device settings of your system.

NOTE:

Help text for the selected field is displayed in the graphical browser by default. To view the help text in the text

browser, press F1.

You can access system setup by using two methods:

● Standard graphical browser—The browser is enabled by default.

● Text browser—The browser is enabled by using Console Redirection.

To view the System Setup screen, perform the following steps:

Steps

1. Turn on, or restart your system.

2. Press F2 immediately after you see the following message:

F2 = System Setup

NOTE:

If your operating system begins to load before you press F2, wait for the system to finish booting, and then

restart your system and try again.

The System Setup Main Menu screen details are explained as follows:

BIOS and UEFI