DH Lifelabs Sciaire Essential Kullanım Kılavuzu - Sayfa 7

Hava Temizleyici DH Lifelabs Sciaire Essential için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DH Lifelabs Sciaire Essential 9 sayfaları.

Sayfayı Yazdır

Device Specifications

Power Consumption

Input Voltage

Fan Speed

Noise

CADR (clean air delivery rate)

Timer

Material & Finish

Recommended Room Size

Reminder

Dimensions (Machine)

Net Weight

50 Watts

120VAC 60Hz

3 levels (Sleep/2/3)

Max. 52 dB

Smoke 138 CFM

Dust

149 CFM

Pollen 151 CFM

2H/4H/8H

ABS, Matte Black or White

214 square feet (19.9 m2)

Filter Replacement Reminder:

3-in-1 HEPA filter

w 9.06in. * H 14.96in.

w 230mm * H 380mm

8.52 lbs (3.87 kg)

Rep

Toubleshooting

Symptom

Purifier is starting to make

noise with low air output.

Purifier will not turn on.

Air coming from Purifier

has a bad odor.

Air quality isn't improving.

Fan does not operate.

Fan speed does not

change after selecting a

new fan speed.

Purifier is very loud.

Purifier won't connect to

the DH Lifelabs App.

Filter replacement

indicator has not turned

on within 12 months,

or turned on before 12

monthes.

Air quality indicator ring

always stays red.

Air quality indicator ring

reads good but the air

quality is bad.

Probable Cause/Solution

3-in-1 HEPA filter may be dirty or obstructed.

Replace filter.

Make sure plug is securely inserted into outlet. Check

fuse or circuit breaker. Replace fuse with a time delay type

or reset the circuit breaker.

The first time you use the purifier, there may be a plastic

smell. This is normal and should fade quickly. If there is a

continuous bad odor or a burning smell, please turn off,

disconnect the device and contact customer support.

Constant introduction of dirty air from surrounding areas

may reduce the effectiveness of the Purifier. Close all

exterior doors and windows.

Ensure that the bottom cover is closed properly, and the

filter is properly installed.

If fan speed does not change after a prolonged period of

time after changing the setting contact customer support.

Ensure that there are no obstacles near the appliance and

that it has a minimum of 12 inches (30 cm) of clearance

around it for optimal operation.

You may need to manually connect your device to the app.

Refer to page 7 of this manual or contact customer support

for assistance.

Filter replacement indicator is reminder for you to check

the filter and will light up based on how much the air

purifier has been used. If you don't use your air purifier

often, it will take longer to turn on. If you use your air

purifier frequently, it will turn on sooner.

The sensor may need to be cleaned (see page 9).

The air quality indicator functions through a PM2.5 sensor

that reads the level of fine particles in the air. There may

be another factor effecting the air quality in the room.