DH Lifelabs Sciaire Pro + HEPA Kullanım Kılavuzu - Sayfa 4

Hava Temizleyici DH Lifelabs Sciaire Pro + HEPA için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DH Lifelabs Sciaire Pro + HEPA 10 sayfaları.
Ayrıca DH Lifelabs Sciaire Pro + HEPA için: Kullanım Kılavuzu (9 sayfalar)

Sayfayı Yazdır

Product Overview

1. Main Body

2. Control Panel with IAQ Light Ring

3. Bipolar Ion Generators (inside)

4. HEPA Filter 2pcs

Activated Carbon Filter 2pcs

5. Side Panel

6. Door Handle and Lock

7. Casters

8. Key and Hook

How It Works

The Sciaire Pro + HEPA contains a fan forcing air through the unit from bottom to top.

There are four stages to the unit:

Stage 1: Pre-filter. Captures large particulate matter including dust, pollen, hair and pet

dander.

Stage 2: HEPA Filter. The true High Efficiency Particulate Air (HEPA) filter captures

particles down to 0.3 microns in diameter.

Stage 3: Activated Carbon Filter. The carbon filter help absorb the odors, harmful gas

& VOCs etc..

Stage 4: Active Plasma Set. The active plasma set generates positive ions and negative

ions that are diffused into the air.

Unpacking and Setup

Remove the unit from the box and check that all the items shown in Figure 1 are

included. It is a good idea to retain the packaging for storing the unit or in the event

it must be shipped back for service.

The unit is shipped with the HEPA filter and activated carbon filter sealed inside a

protective plastic bag. Open the door with the key and remove the HEPA filter and

activated carbon filter from the plastic bag, then replace it inside the unit and close

the door.

Locate the unit on a flat, solid surface in proximity to an AC electrical outlet.

Connect the AC adapter to the unit, and route the power cord to the outlet, but

do not plug it in yet. Make sure that the power cord is out of the way and does not

pose a tripping hazard, and is out of reach of children and pets.