Dell Force10 C300 Hızlı Başlangıç Kılavuzu - Sayfa 13
Sunucu Dell Force10 C300 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dell Force10 C300 33 sayfaları. Quick start guide
Sayfayı Yazdır
•
To protect against high-voltage shock, install a power supply blank (CC-C-
BLNK-PWR) on all unused power supply slots.
CAUTION: Some CH-C300 chassis may require Dell Force10 assistance when
using some DC power supplies. Please contact the Dell Force10 TAC if you
experience any difficulty during installation
Step
Task
Turn the remote power source (the circuit breaker panel) to the OFF
1
position.
Turn the over-current switch (located on the PEM front panel) to the
2
OFF position.
Loosen the PEM safety cover retaining screw and remove the cover.
3
Slide the PEM into slots 1 and 2 (for the C150) or slots 0 and (for the
4
C300)
C150 Entry Module Installation
Over-Current Switch
C300 Power Entry Module Installation
NOTE: Fill all empty slots with blank panels.
Safety Cover
Retaining Latch
Handle
Power Supply Blank
Installing the Hardware
11