Dell Force10 S2410 Hızlı Başlangıç Kılavuzu - Sayfa 8

Sunucu Dell Force10 S2410 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dell Force10 S2410 31 sayfaları. Installing the s2410 system
Ayrıca Dell Force10 S2410 için: Manuel (42 sayfalar)

Sayfayı Yazdır

Attaching Mounting Brackets

S2410 systems have no stacking or other optional modules, so, to install the

S2410 system, you can simply install the system on a tabletop, in a rack, or in a

cabinet, turn it on, and then connect ports.

The S2410 is shipped with two universal front-mounting brackets (rack ears),

which are contained in a bag with 3 Phillips screws for each rack ear.

Step

Task

Take the brackets and screws out of their packaging.

Attach the ears to the front corners of the switch.

Installing on Rack

Ensure that your equipment rack is earth ground. The equipment rack must be

grounded to the same ground point used by the power service in your area. The

ground path must be permanent.

Installing the Hardware

CAUTION: Use only the supplied screws for attaching the

rack ears. Longer screws might compromise the electronics.

Shorter or weaker screws might not adequately support the

S2410.