Avtron Sigma Control Hızlı Başlangıç Kılavuzu

Ağ Geçidi Avtron Sigma Control için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Avtron Sigma Control 2 sayfaları. Wireless gateway

Avtron Configured Access Point

If you have ordered a wireless access point with your SIGMA Wireless Gateway

please follow the instructions below. The Avtron access point will allow a network

of up to 100 SIGMA wireless gateways.

1. Connect and power up the access

point/s or ensure existing wireless

network is available.

5. Use SIGMA Network Pro or

Modbus based software to discover

and connect to the Gateway(s).

2. Connect the DB9 cable into the

gateway and connect to the load

bank.

SIGMA CONTROL

Quick Start Guide

Please update your load bank to the latest firmware. Download from

website SIGMA Wireless Gateway Technical Documents.

3. Power up load bank.

For setup support please contact [email protected] or call +44 (0) 1780 480033.

The Modbus/TCP protocol is inherently unsecure and therefore should be used with care to avoid

sensitive information disclosure and unauthorized access. To mitigate the risks associated with

weaknesses in the Modbus/TCP protocol, users should set up network segmentation and implement a

firewall to block all unauthorized access.

Wireless Gateway

4. LED on the Gateway will blink

green once per second when

connected to the network.