Dell P570F Kullanıcı El Kitabı - Sayfa 15
Sunucu Dell P570F için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Dell P570F 37 sayfaları.
Ayrıca Dell P570F için: Kullanıcı El Kitabı (35 sayfalar), Kullanıcı El Kitabı (35 sayfalar)
Sayfayı Yazdır
Table 11. Status LED indicators and descriptions
Icon
Description
Hard drive
indicator
Temperature
indicator
Electrical
indicator
Memory indicator The indicator turns solid amber if a
PCIe indicator
appliance health and appliance ID indicator codes
The appliance health and appliance ID indicator is located on the left control panel of your appliance.
Figure 7. appliance health and appliance ID indicators
Table 12. appliance health and appliance ID indicator codes
appliance health and appliance ID indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber
Condition
The indicator turns solid amber if
there is a hard drive error.
The indicator turns solid amber
if the appliance experiences a
thermal error (for example, the
ambient temperature is out of
range or there is a fan failure).
The indicator turns solid amber
if the appliance experiences an
electrical error (for example,
voltage out of range, or a failed
power supply unit (PSU) or voltage
regulator).
memory error occurs.
The indicator turns solid amber if a
PCIe card experiences an error.
Corrective action
Check the System Event Log to determine if the
drive has an error. If the problem persists, see
Support.
Ensure that none of the following conditions exist:
● A cooling fan has been removed or has failed.
● appliance cover, air shroud, memory module
blank, or back filler bracket is removed.
● Ambient temperature is too high.
● External airflow is obstructed.
If the problem persists, see Support.
Check the System Event Log or appliance messages
for the specific issue. If it is due to a problem with
the PSU, check the LED on the PSU. Reseat the
PSU. If the problem persists, see Support.
See the
Support
See the
Support
NOTE:
For more information about the
supported PCIe cards, see
installation
Condition
Indicates that the appliance is turned on, appliance is healthy,
and appliance ID mode is not active. Press the appliance health
and appliance ID button to switch to appliance ID mode.
Indicates that the appliance ID mode is active. Press the
appliance health and appliance ID button to switch to appliance
health mode.
Indicates that the appliance is in fail-safe mode. If the problem
persists, see Support.
Indicates that the appliance is experiencing a fault. If the problem
persists, see Support.
section.
section.
Expansion card
guidelines.
Overview
15