Dell PowerApp 110 Kurulum Kılavuzu - Sayfa 28
Sunucu Dell PowerApp 110 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dell PowerApp 110 34 sayfaları. Rack installation guide
Sayfayı Yazdır
1-20
Rack Installation Guide
3.
At the front of the rack cabinet, position one of the slide assemblies so that its
mounting-bracket flange fits between the marks or tape you placed on the rack,
marking the upper and lower edges of the template (see Figure 1-17). The hooks
on the bottom of the mounting bracket should enter the holes beside the lower
marks you made in the vertical rails.
4.
Secure the front of the mounting-bracket flange with a 10-32 x 0.5-inch pan-head
Phillips screw in the front vertical rail (see Figure 1-17).
5.
Push back on the back mounting-bracket flange until the mounting hook locks into
the matching square hole on the back vertical rail.
6.
Repeat steps 3 through 5 for the remaining slide assembly on the other side of
the rack.
10-32 x 0.5-inch
pan-head Phillips
screw (2 per slide
assembly)
front of rack
Figure 1-17. Installing the Slide Assemblies
mounting-bracket
flange
slide assemblies (2)