Dell PowerEdge 1550 Kurulum Kılavuzu - Sayfa 5

Sunucu Dell PowerEdge 1550 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dell PowerEdge 1550 6 sayfaları. Wake-on-lan (wol) support on dell servers
Ayrıca Dell PowerEdge 1550 için: Kurulum Kılavuzu (3 sayfalar), Bilgi Güncellemesi (12 sayfalar), Kurulum Kılavuzu (24 sayfalar), Kurulum ve Özellik Bilgileri (9 sayfalar), Manuel (15 sayfalar), Kullanıcı Kılavuzu (34 sayfalar)

support.dell.com

Loosen the front-panel thumbscrews securing the front panel to the rack and pull

the system chassis out of the top cover to its fully extended position.

Prepare the expansion card for installation.

See the documentation that came with the expansion card for information on

configuring the card, making internal connections, or otherwise customizing the

card for the system.

To install the card, first align the metal mounting bracket with its slots on the back

panel and then insert the card-edge connector firmly into the connector on the 5V

riser board (see Figure 1-2).

expansion card

Figure 1-2. Expansion-Card Installation

When the card is firmly seated in the connector and the card-mounting bracket is

aligned with the brackets on either side of it, close the expansion-card latch and

tighten the thumbscrew.

7 .

If the expansion card is a full-length card, secure the inner end of the card by

closing the plastic latch on the card guide over the top edge of the card.

Connect any cables that should be attached to the card.

See the documentation that came with the card for information about cable

connections.

Slide the system into the rack and the top cover, and then reconnect the system

and peripherals to their AC power sources and turn them on.

riser board in

connector PCI2

Five-Volt Riser Board Installation

1-3