Dell PowerEdge 1750 Ser'in El Kitabı - Sayfa 16

Sunucu Dell PowerEdge 1750 için çevrimiçi göz atın veya pdf Ser'in El Kitabı indirin. Dell PowerEdge 1750 34 sayfaları. Systems
Ayrıca Dell PowerEdge 1750 için: Manuel (15 sayfalar), Veri Sayfası (2 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar)

Sayfayı Yazdır

Figure 3-1. Main System Setup Program Screen

Table 3-2

lists the options and descriptions for the information fields that appear on the main System Setup program screen.

NOTE:

The System Setup program defaults are listed under their respective options, where applicable.

Table 3-2. System Setup Program Options

Option

Description

System Time

Resets the time on the system's internal clock.

System Date

Resets the date on the system's internal calendar.

Diskette Drive A:

Displays a screen that allows you to select the type of diskette drive for your system.

System Memory

Displays the amount of system memory. This option has does not have user-selectable settings.

Video Memory

Displays the amount of video memory. This option does not have user-selectable settings.

Redundant Memory Enables or disables the redundant memory feature. When enabled, all memory banks except for the last one are reported back to the

operating system. The last bank is reserved for failover conditions. When disabled, all of the available system memory is reported to the

operating system.

NOTE:

This feature can be enabled only if all memory banks are populated with memory modules of the same type.

OS Install Mode

Determines the maximum amount of memory available to the operating system. On sets the maximum memory to 256 MB. Off makes all

(Off default)

of the system memory available to the operating system. Some operating systems cannot install with more than 2 GB of system

memory. Enable this option (On) during operating system installation and disable (Off) after installation.

CPU Information

Displays information related to microprocessors (speed, cache size, and so on). Enable or disable Hyper-Threading technology by

(Logical Processor

changing the setting of the Logical Processor option.

Enabled default)

Virtual Media

Enables or disables the virtual media feature (when available). Options are Enabled and Disabled. The default is Disabled until the

(Disabled default)

option becomes available.

Boot Sequence

Determines the order in which the system searches for boot devices during system startup. Available options can include the diskette

drive, CD drive, hard drives, and network.

Hard-Disk Drive

Determines the order in which the system searches the hard drives during system startup. The selections depend on the hard drives

Sequence

installed in your system.

Integrated Devices

See

"Integrated Devices

PCI IRQ

Displays a screen to change the IRQ assigned to each of the integrated devices on the PCI bus, and any installed expansion cards that

Assignment

require an IRQ.

PCI Slot

Displays a menu of selectable fields. Selecting any of the fields displays the following information for the PCI bus you selected:

Information

Occupied or unoccupied

For occupied slots, the operating frequency and mode of the slots (PCI or PCI-X)

For unoccupied slots, the maximum operating frequency and the capable operating mode of the slots

Console

See

"Console Redirection

Redirection

System Security

Displays a screen to configure the system password and setup password features. See

Setup

Password" for more information.

Keyboard NumLock

Determines whether your system starts up with the NumLock mode activated on 101- or 102-key keyboards (does not apply to 84-key

keyboards).

Report Keyboard

Enables or disables reporting of keyboard errors during the POST. Enable this option for host systems that have keyboards attached.

Errors

Select Do Not Report to suppress all error messages relating to the keyboard or keyboard controller during POST. This setting does not

Screen."

"Using the System

Password" and

"Using the