Dell PowerEdge 1850 Kullanıcı Kılavuzu - Sayfa 22

Sunucu Dell PowerEdge 1850 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell PowerEdge 1850 31 sayfaları. Dell server quick reference
Ayrıca Dell PowerEdge 1850 için: Destek Matrisi (21 sayfalar), Tamamlayıcı Kılavuz (20 sayfalar), Bilgi Güncellemesi (24 sayfalar), Kurulum Kılavuzu (22 sayfalar), Güncelleme Kılavuzu (14 sayfalar), Yükseltme Kılavuzu (14 sayfalar), Hızlı Referans (2 sayfalar)

Sayfayı Yazdır
Dell PowerEdge 1850 Kullanıcı Kılavuzu
4

Changing the Lamp

CAUTION:
follow the Safety Instructions as described on page 7.
Replace the lamp when the message "Lamp is approaching the end of its
useful life in the operation. Replacement suggested!
www.dell.com/lamps" appears on the screen. If this problem persists after
replacing the lamp, contact Dell.
CAUTION:
working condition of your projector.
CAUTION:
attempt to replace the lamp until the projector has been allowed to
cool down for at least 30 minutes.
CAUTION:
Projector lamps are very fragile and may shatter if touched. The
shattered glass pieces are sharp and can cause injury.
CAUTION:
projector and dispose or recycle according to state, local, or federal
law. For more information see www.dell.com/hg.
Turn off the projector and disconnect the
1
power cord.
Let the projector cool for at least 30
2
minutes.
Loosen the screw that secures the top
3
cover, and remove the cover.
Loosen the screw that secures the lamp.
4
Pull the lamp up by its metal handle.
5
NOTE:
Dell may require lamps
replaced under warranty to be
returned to Dell. Otherwise, contact
your local waste disposal agency for
the address of the nearest deposit
site.
22

Maintenance

Maintenance
Before you begin any of the procedures in this section,
Use an original lamp to ensure safe and optimal
The lamp becomes very hot when in use. Do not
Do not touch the bulb or the lamp glass at any time.
If the lamp shatters, remove all broken pieces from the