Dell PowerEdge 1950 Bilgi Güncellemesi - Sayfa 6

Sunucu Dell PowerEdge 1950 için çevrimiçi göz atın veya pdf Bilgi Güncellemesi indirin. Dell PowerEdge 1950 50 sayfaları. Trusted platform module (tpm) update
Ayrıca Dell PowerEdge 1950 için: Kurulum Bilgileri (11 sayfalar), Kurulum Kılavuzu (10 sayfalar), Güncelleme (2 sayfalar)

Sayfayı Yazdır

Table 1-1. System Messages

Message

The FBD link to the

following DIMM failed

to train: DIMM x

FBD training error -

The following memory

branch has been disabled:

Branch x

LCD Status Messages Update

Table 1-2 lists updates to the LCD status messages that can occur and the probable cause for each

message. The LCD messages refer to events recorded in the system event log (SEL). For information on

the SEL and configuring system management settings, see your systems management software

documentation.

Table 1-2. LCD Status Messages

Code

Text

E1118

CPU Temp Interface

E122B

0.9 V Over Voltage

E122C

CPU Power Fault

NOTE:

Each diagnostic LCD message is assigned a priority. The highest priority messages will supersede

any group of messages with a lower priority.

Information Update

Causes

An error has occurred on the

FBD channel that contains the

specified DIMM. A fault is

indicated on the link adjacent

to the DIMM caused by a faulty

condition in either the specified

DIMM, the next DIMM in the

channel, or possibly the system

board. When this error occurs,

the other FBD branch in the

memory pair is disabled,

resulting in the second error

message.

Causes

The BMC is unable to determine

the CPU(s) temperature status.

Consequently, the BMC increases

the CPU fan speed to maximum

as a precautionary measure.

0.9 V regulator voltage has exceeded

the allowable voltage range.

A voltage regulator failure was detected

when the processor regulator(s) was

enabled.

Corrective Actions

Reseat all of the DIMMs on the

indicated FBD channel. See

"Memory" in the Hardware Owner's

Manual for information about the

FBD branches and channels. See

"Troubleshooting System Memory" in

the Hardware Owner's Manual. If the

problem persists, see "Getting Help"

in the Hardware Owner's Manual.

Corrective Actions

Turn off power to the system

and restart the system. If the

problem persists, see "Getting

Help" in the Hardware Owner's

Manual.

See "Getting Help" in the

Hardware Owner's Manual.

See "Getting Help" in the

Hardware Owner's Manual.