Dell PowerEdge 2400 Manuel - Sayfa 7

Sunucu Dell PowerEdge 2400 için çevrimiçi göz atın veya pdf Manuel indirin. Dell PowerEdge 2400 15 sayfaları. Wake-on-lan (wol) support on dell servers
Ayrıca Dell PowerEdge 2400 için: Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (8 sayfalar), Raf Kurulum Talimatları (32 sayfalar), Güncelleme (2 sayfalar), Etkinleştirme Kılavuzu (8 sayfalar), Kurulum Kılavuzu (8 sayfalar), Güncelleme Kılavuzu (2 sayfalar)

3. Unplug the system and send it to the remote site to be installed. The system

must be removed from all A/C input for a period of at least 10 seconds to

allow all capacitance to drain from the system so it resets to its default state.

The system must not be powered on, just connected to A/C and the WOL

enabled NIC connected to the active network. The system is now ready to be

powered on via WOL when needed.

4. Send a 'Magic Packet' wake up signal to the MAC address of the WOL

enabled NIC, and the system will boot. Out‐of‐Box WOL can only be

accomplished via the 'Magic Packet' WOL signal.

October 2007

Page 7

Dell Enterprise Product Group