Dell PowerEdge 2800 Manuel - Sayfa 8

Sunucu Dell PowerEdge 2800 için çevrimiçi göz atın veya pdf Manuel indirin. Dell PowerEdge 2800 44 sayfaları. Poweredge 2800 server
Ayrıca Dell PowerEdge 2800 için: Bilgi Güncellemesi (24 sayfalar), Kurulum Kılavuzu (22 sayfalar), Dönüşüm Manualline (36 sayfalar), Donanım Kurulumu (14 sayfalar), Hızlı Referans (2 sayfalar), Teknik Özellikler (2 sayfalar)

Figure 1-3. Installing the RAID Key

If you have a PowerEdge 1850 system, place the plastic riser card insulator over the riser card

and press down on the two plastic rivets to secure the insulator.

If you have a PowerEdge 2800 system, go to step 18.

If you have a PowerEdge 2850 system, replace the riser card.

Close the system.

Reconnect the system to its electrical outlet and turn on the system, including any attached

peripherals.

Enter the System Setup program and verify that the setting for the SCSI controller has

changed to reflect the presence of the RAID hardware.

Install and configure the RAID software. See your RAID documentation for more

information.

NOTICE:

before you can operate the RAID controller in write-back mode.

Install the bezel (if applicable).

1-6

Activating the Integrated RAID Controller

hardware key

latches (2)

The newly-installed RAID battery must be charged for 3 to 4 hours of system operation