Dell PowerEdge 2850 Tamamlayıcı Kılavuz - Sayfa 5
Sunucu Dell PowerEdge 2850 için çevrimiçi göz atın veya pdf Tamamlayıcı Kılavuz indirin. Dell PowerEdge 2850 20 sayfaları. Dell server quick reference
Ayrıca Dell PowerEdge 2850 için: Kurulum Kılavuzu (32 sayfalar), Destek Matrisi (21 sayfalar), Bilgi Güncellemesi (24 sayfalar), Manuel (44 sayfalar), Hızlı Referans (2 sayfalar), Kullanıcı Kılavuzu (30 sayfalar)
Sayfayı Yazdır
14
To remove the system board:
Lift up the blue retention pin and slide the system board towards the front of the system
a
to disengage the board from the retention tabs on the chassis. See Figure 1-2.
Raise the back edge of the board slightly to clear the chassis, then lift the system board
b
out of the system.
Figure 1-2. Removing the System Board
retention pin
system board
Installing the New System Board and Riser Board
1
Unpack the new system board.
2
Carefully lower the system board into the chassis until the tabs on the chassis fit through the
corresponding slots in the system board. See Figure 1-2.
3
Slide the system board towards the back of the chassis until the retention pin engages.
4
Replace the memory modules in their original locations.
slots
tabs
Upgrading Your System Board and Riser Board
5