Dell PowerEdge 2850 Kullanıcı Kılavuzu - Sayfa 15
Sunucu Dell PowerEdge 2850 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell PowerEdge 2850 30 sayfaları. Dell server quick reference
Ayrıca Dell PowerEdge 2850 için: Kurulum Kılavuzu (32 sayfalar), Destek Matrisi (21 sayfalar), Tamamlayıcı Kılavuz (20 sayfalar), Bilgi Güncellemesi (24 sayfalar), Manuel (44 sayfalar), Hızlı Referans (2 sayfalar)
Sayfayı Yazdır
6. Run the program or specify the location to save the files.
Using the Utility Partition
The utility partition is a bootable partition on the hard drive that contains system configuration and diagnostic utilities. When you start the utility partition, it
boots and provides an executable environment for the partition's utilities.
To start the utility partition, turn on or reboot the system. During POST, press <F10> after the following message appears:
<F10> = Utility Mode
NOTE:
The utility partition provides only limited MS-DOS® functionality and cannot be used as a general-purpose MS-DOS partition.
The utility partition provides a text-based interface from which you can run the partition's utilities. To select a menu option, use either the arrow keys to
highlight the option and press <Enter> or type the number of the menu option. To exit the utility partition, press <Esc> from the Utility Partition main menu.
Table 2-1
provides a sample list and explanation of the options that appear on the utility partition menu. These options are available even when the Server
Assistant CD is not in the CD drive.
Table 2-1. Utility Partition Main Menu Options
Option
Description
Run system diagnostics
Runs the system hardware diagnostics
Run RAID configuration utility Runs the RAID configuration utility if ROMB is enabled or RAID controller card is installed
NOTE:
The options displayed may vary depending on your system configuration and may not include those listed here.
Back to Contents Page