Dell PowerEdge 2950 Kurulum Bilgileri
Sunucu Dell PowerEdge 2950 için çevrimiçi göz atın veya pdf Kurulum Bilgileri indirin. Dell PowerEdge 2950 11 sayfaları. Cabling instructions for the -48 vdc power supply
Ayrıca Dell PowerEdge 2950 için: Bilgi Güncellemesi (50 sayfalar), Kurulum Kılavuzu (10 sayfalar), Güncelleme (2 sayfalar), Talimatlar Kılavuzu (15 sayfalar)
Sayfayı Yazdır
About Cautions
CAUTION:
A CAUTION indicates a potential for property damage, personal injury, or death.
Microprocessor Installation Information
CAUTION:
Any installation that requires removal of the system cover is intended solely to be performed
by trained service technicians. See your Product Information Guide for complete information about safety
precautions, working inside the computer and protecting against electrostatic discharge.
NOTICE:
If the front of your system chassis is labeled with a "II," your system is upgradeable to the Quad-Core
®
®
Intel
Xeon
Processor 5300 series. See www.dell.com and support.dell.com for information on processor
availability and upgrade options for your system.
Prior to adding or replacing a processor, you must verify that the latest system BIOS and BMC firmware
versions are on your system. Loading the latest BIOS and BMC firmware versions will ensure that the
processor is fully supported.
NOTICE:
Failure to update your system to the latest BIOS and BMC firmware versions prior to installing the
microprocessor can result in your system hanging during POST.
1 Check your system BIOS version in the System Setup program. See "Using the System Setup Program"
in the Hardware Owner's Manual included on the CDs provided with your system or on support.dell.com.
2 Check the latest system BIOS version available on support.dell.com.
3 Download and flash the latest BIOS version if necessary.
4 Check your system BMC firmware version in the BMC Configuration Utility. To enter the BMC
Configuration Utility, press <Ctrl+E> when prompted during POST. For more information,
see the BMC User's Guide included on the CDs provided with your system or on support.dell.com.
5 Check the latest system BMC firmware version available on support.dell.com.
6 Download and flash the latest BMC firmware, if necessary.
7 Install the processor. See "Installing System Components" in the Hardware Owner's Manual
included on the CDs provided with your system or on support.dell.com.
____________________
Information in this document is subject to change without notice.
© 2006–2007 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Intel and Xeon are registered trademarks of Intel Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
March 2007