Dell PowerEdge 4200 Series Kurulum Kılavuzu - Sayfa 14
Sunucu Dell PowerEdge 4200 Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dell PowerEdge 4200 Series 28 sayfaları. Dell poweredge 4200 servers: installation guide
Ayrıca Dell PowerEdge 4200 Series için: Raf Kurulumu (37 sayfalar), Raf Kurulumu (34 sayfalar)
Sayfayı Yazdır
1-8
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
Figure 1-6. Removing the Cable Tray
Removing the System From the Rack
The subsections that follow include instructions for removing the system from the
rack and removing the rails and other hardware associated with the rack installation
of the system.
Removing the System
To remove the system from the rack, perform these steps.
WARNING: If you are removing more than one system, first remove the
system in the highest position. Never pull more than one system out of the
rack at a time.
1.
Slide the system out of the rack until the slides lock in the extended position.
WARNING: Because of the size and weight of the system, never attempt to
remove the system from the slide assemblies by yourself.
2.
Press the green button near the end of each interior slide to release the slide
locks (see Figure 1-7), and then slide the system completely out of the rack.
back of computer
cable tray
6-32 x 0.25-inch screws (5)