Dell PowerEdge 4210 Manuel - Sayfa 3

Sunucu Dell PowerEdge 4210 için çevrimiçi göz atın veya pdf Manuel indirin. Dell PowerEdge 4210 20 sayfaları. Cabling poweredge t610
Ayrıca Dell PowerEdge 4210 için: Manuel (20 sayfalar), Manuel (17 sayfalar), Manuel (12 sayfalar), Manuel (10 sayfalar), Manuel (10 sayfalar), Manuel (9 sayfalar), Manuel (9 sayfalar), Manuel (10 sayfalar), Kurulum Kılavuzu (24 sayfalar), Manuel (12 sayfalar), Manuel (11 sayfalar), Manuel (8 sayfalar)

Sayfayı Yazdır
Dell PowerEdge 4210 Manuel
5 Install the coupling brackets.
Position the two racks side by side.
a
Adjust the leveling feet on both racks so that the racks are parallel and in
b
the same horizontal plane. For instructions, see "Adjusting the Leveling
Feet" in your rack installation guide.
Install the four coupling brackets on the racks (two on the top and two
c
on the bottom) as shown in Figure 1-3.
Hook the brackets into the square holes inside and adjacent to the rack
posts, and tighten the brackets using the wing nuts (see Figure 1-3).
Figure 1-3. Coupling Two Racks
3
2
1
coupling bracket locations
3
coupling bracket (4)
1
2
wing nut