Dell PowerEdge 4820 Manuel - Sayfa 11

Sunucu Dell PowerEdge 4820 için çevrimiçi göz atın veya pdf Manuel indirin. Dell PowerEdge 4820 12 sayfaları. Rack enclosures
Ayrıca Dell PowerEdge 4820 için: Manuel (12 sayfalar), Manuel (11 sayfalar), Manuel (8 sayfalar), Teknik Kılavuz (37 sayfalar)

Sayfayı Yazdır
Dell PowerEdge 4820 Manuel
Cable Routing Procedures for Dell™ PowerEdge™ R415 Systems

Figure 10: Disconnecting the Inner CMA Attachment Bracket

Figure 11: Replacing the Outer Power Supply

Section 4: Cabling a PowerEdge™ R415 System Installed in Static Rails
NOTE: The CMA is compatible with the sliding rails only, not the static rails.
1.
Follow the instructions contained in the
to install the server into a two-post or four-post rack.
2. Install the hook and loop straps provided in the rail kit through the slots in the rear brackets of
the rails as described in the
3. Connect all applicable cables to the rear of the system and verify that all connections are
secure.
Rack Installation Instructions
Rack Installation Instructions
Disconnected inner
CMA bracket
found in the static rail kit
.
Page 9