Dell PowerEdge M520 Kullanıcı Kılavuzu - Sayfa 24

Sunucu Dell PowerEdge M520 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell PowerEdge M520 26 sayfaları. Dell poweredge blade servers getting started guide
Ayrıca Dell PowerEdge M520 için: Bilgi Güncellemesi (38 sayfalar), Sürüm Notları (27 sayfalar), Manuel (25 sayfalar), Kullanıcı Kılavuzu (23 sayfalar), Önemli Bilgiler Kılavuzu (35 sayfalar), Güncelleme Kılavuzu (32 sayfalar), Güncelleme Kılavuzu (28 sayfalar), Kullanıcı Kılavuzu (22 sayfalar), Başlangıç Kılavuzu (12 sayfalar), Teknik Kılavuz (46 sayfalar), Teknik Kılavuz (45 sayfalar), Portföy Kılavuzu (27 sayfalar), Başlangıç Kılavuzu (14 sayfalar), Başlangıç Kılavuzu (12 sayfalar)

Dell PowerEdge M520 Kullanıcı Kılavuzu
Rev 1.00
# exit
Step 5. Power cycle the 10GbE PTM for the firmware to take effect. From the CMC command
line type the following command:
$ racadm chassisaction -m switch-<n> powercycle
Step 6. Wait for 20 seconds, and then connect to the 10GbE PTM. Run:
$ connect switch-<n>
Step 7. Login to the 10GbE PTM command line interface as admin. Run:
# login admin
Step 8. To confirm that all three PhyX chips have the same firmware version, run the command:
& show image ver
Software image version: 1.0.28-201005131448-62
Component #1 FW version: 8.2.958
Component #2 FW version: 8.2.958
Component #3 FW version: 8.2.958
&

4.3.2 Updating Firmware for a Single PhyX Device

Step 1. Connect to the 10GbE PTM. Run:
$ Connect switch-<n>
Where n is the number of the switch, 2 in our example.
Step 2. To start the upgrade process for a single PhyX device (1,2, or 3), run the command:
# copy image from-file [device number]
The system is now waiting for the file to be transferred from the SSH client.
To complete the procedure, please follow Step 3 through Step 8 as described in
24
Software User's Manual
Section 4.3.1
above.