Dell PowerEdge PDU Metered LCD Manuel - Sayfa 11

Sunucu Dell PowerEdge PDU Metered LCD için çevrimiçi göz atın veya pdf Manuel indirin. Dell PowerEdge PDU Metered LCD 11 sayfaları. Site planning guide
Ayrıca Dell PowerEdge PDU Metered LCD için: Manuel (11 sayfalar), Manuel (11 sayfalar), Manuel (9 sayfalar), Saha Planlama Kılavuzu (8 sayfalar)

Sayfayı Yazdır

Cable Routing Procedures for the Dell PowerEdge R520 System

Figure 11.

Section 4: Cabling a PowerEdge R520 system installed on static

rails

NOTE: The CMA is compatible only with the sliding rails, not the static rails.

1. Follow the instructions contained in the Rack Installation Instructions found in the static rail kit to

install the server into a two-post or four-post rack.

2. Install the hook-and-loop straps provided in the rail kit through the slots in the rear brackets of the

rails as described in the Rack Installation Instructions.

3. Connect all applicable cables to the rear of the system and verify that all connections are secure.

4. Using the hook-and-loop straps, bundle the cables and secure them to either the left rail or right

rail as described in the Rack Installation Instructions. See Figure 12 for an example of data cables

secured to the left rail and power cables secured to the right rail (as viewed from the rear of the

system).

Figure 12.

Removing the outer CMA brackets for shallow racks

Cabling a system installed in static rails