Dell PowerEdge Rack Enclosure 4620S Manuel - Sayfa 7

Sunucu Dell PowerEdge Rack Enclosure 4620S için çevrimiçi göz atın veya pdf Manuel indirin. Dell PowerEdge Rack Enclosure 4620S 12 sayfaları. Cabling poweredge t610
Ayrıca Dell PowerEdge Rack Enclosure 4620S için: Manuel (20 sayfalar), Manuel (20 sayfalar), Manuel (17 sayfalar), Manuel (12 sayfalar), Manuel (10 sayfalar), Manuel (10 sayfalar), Manuel (9 sayfalar), Manuel (9 sayfalar), Manuel (10 sayfalar), Manuel (12 sayfalar), Manuel (11 sayfalar), Manuel (8 sayfalar)

Sayfayı Yazdır

Dell PowerEdge Rack Enclosure 4620S Manuel

Cable Routing Procedures for Dell™ PowerEdge™ R310 & R410 Systems

Figure 5: Attaching the KVM Dongle to the CMA Basket

KVM Dongle

4. Once you have routed all the cables through the CMA, dress the cable slack between the back of

the system and the entrance of the CMA using the tie wraps (shown in yellow in all illustrations)

provided in the CMA kit.

5. Clip off the excess length of material from the tie wraps. Make sure that the heads of the tie wraps

are positioned so as to avoid interference with adjacent systems. Return the CMA to the closed

(retracted) position.

6. Extend the system out of the rack to verify that there is sufficient slack in the cables on both ends

of the CMA.

See Figure 6 for an example of a completed left-side mounted CMA installation.

Use the hook and loop straps on the

CMA basket to secure the KVM dongle.

Page 5