Avue Outdoor 36x with WDR Kullanıcı Kılavuzu - Sayfa 10

Güvenlik Kamerası Avue Outdoor 36x with WDR için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avue Outdoor 36x with WDR 15 sayfaları. High speed dome camera series

Sayfayı Yazdır
OSD - Camera Setting
PASSWORD SETUP
Password setup
O
LD PASSWORD
: ******
NEW PASSWORD
: ******
You can change password to access the OSD menu.
CONF PASSWORD : ******
Default Password is 000000.
ENABLE PASSWORD OFF
BACK
Clock setting
EXIT
Some function like Auto-Tracking require the timer for
CLOCK SETTING
activation.
Time:
TIME
00:00:00
DATE:
DATE
01/01/01
DAY:
DAY
MON
BACK
EXIT
CAMERA SETTING
C A M E R A
S E T T I N G
In camera setting menu, you can setup camera module
ZOOM SPEED
HIGH
related settings. please note that depends on module's
DIGITAL ZOOM
ON
capability, some function may not available. please contact
BLC MODE
OFF
your local sales representative for detailed information.
SLOW SHUTTER
ON
LINE SYNC
N/A
ZOOM SPEED:
WDR MODE
N/A
ADVANCE SETTING 1
function.
ADVANCE SETTING 2
DIGITAL ZOOM:
BACK
function of the camera module.
EXIT
BLC MODE:
improves the image when an object has strong back light.
SLOW SHUTTER:
of the camera, which provides a higher light sensibility
in low-environment.
WDR:
improves the image contrast when an object has very
strong light on background. Only available with camera
modules with WDR.
ADVANCE SETTING1
IR CUT FILTER:
Filter (IRC), also known as "DAY/NIGHT" mode. with the
A D V A NC E SET TI N G 1
removal of IRC, the camera turns into Black/White mode and
has higher sensibility to low-light or IR-Light in the night.
IR CUTTER FILTER
AUTO
Selectable between On, Off, Auto or Time. Only available
IR CUT ON TIME
N/A
on camera module with IRC function.
IR CUT OFF TIME
N/A
MAX GAIN:
THRESHOLD
10dB
EXPOSURE COMP:
MAX GAIN
28dB
of a short exposure.Configure the shutter speed of a long
EXPOSURE COMP
OFF
exposure by setting the ratio with regards to a short
MIRROR
OFF
exposure with the exposure ratio parameter. Blocked-up
FLIP
OFF
shadow correction is not performed in this mode.
NEXT
Mirror:
Flip:
15
Some products may not be available in your country, please contact our distributor for more details
HH:MM:SS
YY/MM/DD
MON-SUN
defines the speed when performing zoom
Activate or deactivate the digital zoom
Select the Back Light Compensation mode,
Activates the Slow Shutter function
Activates the Wide Dynamic Range function, which
Enables the removal of Infrared Cutter
improve the image quality in the Night modus
This mode fixes the shutter speed
This function reverses the camera horizontally.
This function turns the camera upside down.
OSD - Preset, Scan
ADVANCE SETTING 1
ADVANCE SETTING 1
These function are o
camera modules
PS SCAN
ON
PS SCAN:
STABLE ZOOM
ON
on the WDR mode.
DNR
00
BACK
STABLE ZOOM:
EXIT
using the Image Stabilizer function in accordance with
the zoom ratio, and smoothly zooming up to
approximately ×40 using a combination of the optical
zoom and digital zoom.
A D V A N CE S E T T I NG 2
DNR:
ADVANCE SETTING 2
AE MODE
AUTO
SHUTTER
N/A
Under the advanced setting, you can make
IRIS
N/A
improvements to image quality due to different
BRIGHT
N/A
environmental conditions.
WB MODE
AUTO
R GAIN
N/A
B GAIN
N/A
AE MODE:
HI-RESOLUTION
OFF
condition in the surveillance area, you can set the AE in
BACK
different modes and adjust the parameters, such as
EXIT
shutter speed, iris factor and brightness for the best
image quality.
WB MODE:
based on DSP processing. you can also adjust the Red-
Gain or Blue-Gain to change the color tone.
ALC, PLC:
additional setting to WB function. only avialble with
FU NC TION SE TTI NG
dedicated camera modules.
FUNCTION SETTING
PRESETS
SCAN
In function setting menu, you can define and activate
PATTERNS
different PTZ funcitons, such as preset points, auto
TOUR
scan, tours and Pattern. Presets and tour functions
ZONES
TIME RUNNING
can also be set or activated directly from keyboard
AUTO-TRACKING
device without OSD. Please refer to the keyboard's
BACK
manual for operation details.
EXIT
PRESETS:
PRESETS
PRESET NUMBER:
128 presets. The number can be selected from 0 to
128.
P R E S E T N U M B E R 0 0 1
S E T P R E S E T
SET PRESET:
S H O W P R E S E T
OSD by entering this menu item and move the PTZ.
C L E A R P R E S E T
AUTO-TRACKING
ON
press IRIS-OPEN key on the keyboard to save. If the
E D I T P R E S E T L A B E L
preset is pointed within digital zoom, it will
BACK
automatically go back to max. optical zoom range in
EXIT
order to provide the best image.
SHOW PRESET:
Some products may not be available in your country, please contact our distributor for more details
nly available with the E-Serie
Activate Progressive Scan, can be combine
This function is performing correction
Set the 2D/3D
D
igital
N
oise
R
eduction.
Auto Exposure mode. Depends on the light
White balance mode, a image improvement
Average and Peak Level Control,
G65-70 Series supports up to
Defining the preset points directly in
Moves to current preset point