Dell VEP4600 Kurulum Kılavuzu - Sayfa 29
Sunucu Dell VEP4600 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dell VEP4600 40 sayfaları.
Ayrıca Dell VEP4600 için: Kurulum Kılavuzu (23 sayfalar), Kurulum Kılavuzu (40 sayfalar)
Sayfayı Yazdır
•
115200 baud rate
•
No parity
•
8 data bits
•
1 stop bit
•
No flow control
When you connect the microUSB-B port, it becomes the primary connection and, while connected, all messages are sent to the
microUSB-B port.
NOTE:
Before starting this procedure, be sure that you have a terminal emulation program already installed on your PC.
Install the appropriate drivers to support the microUSB-B port. To download Dell EMC drivers, see
www.dell.com/support. If your computer requires non-Dell EMC drivers, contact Dell EMC Technical Support for
assistance.
1. Power on the PC.
2. Connect the USB-A end of cable into an available USB port on the PC.
3. Connect the microUSB-B end of cable into the microUSB-B console port on the platform.
4. Power on the platform.
5. Install the necessary USB device drivers.
To download Dell EMC drivers, see https://www.dell.com/support. If your computer requires non-Dell EMC drivers, contact Dell EMC
Technical Support for assistance.
6. Open your terminal software emulation program to access the platform.
7. Confirm that the terminal settings on your terminal software emulation program are as follows:
•
115200 baud rate
•
No parity
•
8 data bits
•
1 stop bit
•
No flow control
https://
Management ports
29