Dell Vostro 220 - Vostro 220 Slim Desktop Computer Servis Kılavuzu - Sayfa 18
Sunucu Dell Vostro 220 - Vostro 220 Slim Desktop Computer için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell Vostro 220 - Vostro 220 Slim Desktop Computer 44 sayfaları. Rack installation guide
Ayrıca Dell Vostro 220 - Vostro 220 Slim Desktop Computer için: Teknik Özellikler (1 sayfalar), Kurulum ve Özellik Bilgileri (10 sayfalar), Raf Kurulum Kılavuzu (40 sayfalar)
Sayfayı Yazdır
CAUTION: Before you remove the computer cover, see
NOTE: Before disconnecting a peripheral from the system or removing a component from the system board, disconnect the power
cable and verify that the standby power LED on the system board is off. For the location of this LED, see Figure 21.
Remove the computer
cover.
1.
2. Remove the airflow shroud.
Squeeze in on the two pairs of tabs on the shroud and lift it away.
3. Remove the existing microprocessor from its connector.
Press outward on the guide bracket tabs to release them from the processor/heat sink assembly. Then pull the processor/heat sink assembly
out of its connector (see Figure 25). You must use up to 15 lb of force to disengage the processor from the connector.
Figure 25. Microprocessor Removal
Figure 26. Microprocessor Replacement
"Precautionary
1 Airflow shroud
2 Thumbscrews (2)
3 Processor/heat sink assembly
4 Guide bracket
5 Second processor (terminator card if a second
processor is not present)
1 Airflow shroud
2 Thumbscrews (2)
3 Processor/heat sink assembly
4 Guide bracket
5 Second processor (terminator card if a second
processor is not present)
Measures"