Dell Wyse 7030 Kullanıcı Kılavuzu - Sayfa 11

Sunucu Dell Wyse 7030 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell Wyse 7030 12 sayfaları. Pcoip zero client

Safety Guidelines

Improper connection, mounting, or use of this product could result in component failure or undesired

interference. Read the following guidelines before setting up and operating your device.

•

Setup:

– Do not connect to AC power until all other connections (including the power adapter) are made.

Connecting or disconnecting components or equipment on the back panel when the device is

receiving AC power can cause power surges and damage the device.

– Do not force a connector into its socket. If any undue resistance is encountered, ensure that the

connector is correctly oriented to the receptacle.

•

Venting and Care:

– Mount the device only as shown or in accordance with the instructions provided with Wyse-

approved mounting accessory kits. Improper orientation could restrict the airflow of heat from the

device and damage it.

– Allow sufficient space around the device for ventilation; do not place the device in any enclosure

that restricts airflow around the device; do not place any objects on the device or block the vent

outlets. For environmental operating specifications, locate your product and download the Fact

Sheet using the Cloud clients tab at,

•

Power Sources:

– To ensure regulatory compliance, use only the power adapter that comes with your device or a

Wyse-approved equivalent. For proper replacement compare the labels on both device and power

adapter to ensure that their voltages match.

WARNING: Use of any other power adapter may damage your device or the power adapter.

The damage caused by an improper power adapter is not covered by warranty.

– When turning off the device, make sure to perform a complete shutdown (via the power button).

Do not disconnect the AC power cord, DC power cord, or shut off power at a circuit breaker

(including power strips), etc., to turn off the device.

– Surge protectors for electrical devices are recommended in areas of lightning. However, when

lightning is occurring, your equipment should be properly shut down and unplugged from AC

power until the storm has passed.