Dell Wyse Z90SW Kurulum Kılavuzu - Sayfa 7

Sunucu Dell Wyse Z90SW için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dell Wyse Z90SW 24 sayfaları. Z class cloud clients
Ayrıca Dell Wyse Z90SW için: Kurulum Kılavuzu (18 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar)

Installing D Class Flash

This chapter contains information for users of Wyse D class thin clients who must

install new flash.

Requirements

•

WARNING: Flash modules may be susceptible to damage by Electro-Static Discharge

(ESD). All industry-standard cautions should be followed to avoid ESD. Before you

remove or install a module, touch any metal part of the chassis and keep that contact

with the chassis during the installation process.

Procedures

CAUTION: Follow all precautions listed in the Quick-Start Guide that came with your

thin client for disconnecting and reconnecting the thin client.

1. Perform a proper shutdown of the thin client by closing all files and ending your

2. Unplug the power cord and power adapter, and remove any other cables from the

3. Position the thin client horizontally, where the Wyse logo-side with four flat screws

Figure 1 Removing the cover screws

Small Phillips screwdriver

session, and then pressing the power button to turn off the thin client.

thin client, and detach the vertical foot.

is facing downward. Using the Phillips Screwdriver, remove the three screws from

the cover along the back panel edge as shown in Figure 1.