Dell 1707FPV - UltraSharp - 17" LCD Monitor Kullanıcı Kılavuzu - Sayfa 20

Monitör Dell 1707FPV - UltraSharp - 17" LCD Monitor için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell 1707FPV - UltraSharp - 17" LCD Monitor 48 sayfaları. Flat panel monitor
Ayrıca Dell 1707FPV - UltraSharp - 17" LCD Monitor için: Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Setting Up Your Monitor: Dell™ 1907FPV Flat Panel Monitor User's Guide

OSD Warning Messages

One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization.

file:///T|/htdocs/monitors/1907FPV/en/setup.htm[8/7/2012 10:06:54 AM]

Exit — Select to exit out of Reset to Factory Settings menu without resetting any OSD options.

Position settings only — Change the settings for Image Position back to original factory settings.

Color settings only — Change the Red, Green, and Blue settings back to their original factory settings and set the default

setting for Normal Preset.

All settings — Change all the user-adjustable settings including color, position, brightness, contrast and OSD hold time to the

factory defaults. The language of the OSD does not change.

DDC/CI — Enable the DDC/CI control function.

DDC/CI (Display Data Channel/Command Interface) allows you to adjust the monitor parameters (brightness, color balance, etc)

via software applications on your PC.

Default is "Enable". You can disable this feature by selecting "Disable".

For best user experience and optimum performance of your monitor, keep this feature enabled.

NOTE: If user select "Disable", display Warning message box as below. Select "Yes" disable DDC/CI

and return to "Factory Reset" menu. Warning message time-out in 20 sec.