Dell 210-ALUI Kullanıcı Kılavuzu - Sayfa 38

Monitör Dell 210-ALUI için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell 210-ALUI 48 sayfaları.

OSD warning messages

When the Dynamic Contrast feature is enabled (in these preset modes: Game or

Movie), the manual brightness adjustment is disabled.

Dell S2718HN/NX

When the monitor does not support a particular resolution mode, the following

message is displayed:

Dell S2718HN/NX

This means that the monitor cannot synchronize with the signal that it is receiving

from the computer. See

frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.

Before the DDC/CI function is disabled, the following message is displayed:

Dell S2718HN/NX

When the monitor enters the Power Save Mode, the following message appears:

Dell S2718HN/NX

Entering Power Save Mode.

If you press any button other than the power button, the following messages will

appear depending on the selected input:

Operating your monitor

To allow manual adjustment of brightness, the Dynamic Contrast

will be switched oﬀ.

Do you want to continue?

The current input timing is not supported by the monitor display.

Please change your input timing to

other monitor listed timing as per the monitor speciﬁcations.

Monitor specifications

The function of adjusting display setting using PC application will be

disabled.

Do you wish to disable DDC/CI function?

Yes

1920x1080, 60Hz

or any

for the Horizontal and Vertical

Yes