Dell 3007WFP - UltraSharp - 30" LCD Monitor Kullanıcı Kılavuzu - Sayfa 20
Monitör Dell 3007WFP - UltraSharp - 30" LCD Monitor için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell 3007WFP - UltraSharp - 30" LCD Monitor 26 sayfaları. User guide
Ayrıca Dell 3007WFP - UltraSharp - 30" LCD Monitor için: Manuel (24 sayfalar)
Sayfayı Yazdır
Back to Contents Page
Setting Up Your Monitor
Dell™ 3007WFP-HC Flat Panel Monitor User's Guide
Connecting Your Monitor
Installing the Utility Tool (Microsoft
Using the Front Panel Buttons
Using the OSD
Using the Dell Soundbar (Optional)
Connecting Your Monitor
CAUTION: Before you begin any of the procedures in this section, follow the
1.
Turn off your computer and unplug the power cord.
2.
Connect the white connector end of the DVI cable attached on the monitor to the connectors on the computer.
Connect the USB cable that was included with your monitor to the computer and the upstream USB connector on the monitor. Once this cable is connected to
3.
the computer and the monitor, you can use the USB downstream on the monitor.
4.
Connect any USB devices.
5.
Connect the power cord.
6.
Turn on your monitor and computer. If you do not see an image, see Troubleshooting Your Monitor. Troubleshooting.
NOTE: The Monitor will display full screen in White, Black, Red, Green and Blue color rolling pattern on screen if the DVI cable is not connected. This self test
pattern will be displayed continually when Monitor detects that DVI cable from Monitor to PC is not connected.
Installing the Utility Tool (Microsoft
The setup.exe application tool launcher provided in the CD allows you to the install utility tool on the computer. This feature queries the monitor for the
brightness parameter and displays the adjustment range bar on the screen.
1.
Insert the CD into the CD drive.
2.
Open the Drivers folder and double-click setup.exe.
NOTE: Ensure that the USB cable is connected between the monitor and the computer.
3.
The install Shield wizard will launch the application tool. Click Next to countinue.
4.
Select Accept the license agreement and click Next.
5.
Click Install to complete the installation. After the installation is complete, click Finish.
You are now ready to view adjustment range bar while adjusting the brightness on the monitor.
®
®
Windows
Operation Systems)
®
Windows
safety
instructions.
®
Operation Systems)