Dell D1920F Kullanıcı Kılavuzu - Sayfa 4

Monitör Dell D1920F için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell D1920F 9 sayfaları. Dell computer monitor user manual

GETTING STARTED

Before beginning, ensure that the carton contains the following items:

1. LCD Monitor

2. Monitor Base and Neck

(the shape of base may vary according to the monitor model)

3. Power Cord

(plug may vary according to the electrical standards

for your area)

4. Analog Signal Cable

5. CD-ROM

(contains user manual)

6 .Quick Installation Guide

1.Setting up the monitor

1.1 Take out the monitor, stand and monitor base from the package.

1.2 Place the monitor base on the desk and then slide the neck

into the slots of base. (Make sure the direction of the neck is

correct.)

1.3 Hold the monitor and then slide the monitor into the neck. (Make

sure the direction of the neck is correct)

2.Connecting signal cable

2.1 Switch off your computer

2.2 Connect the signal cable to the D-SUB port at the rear of

the monitor and tighten the connector screws

2.3 Connect the other end of signal cable to the computer's

VGA port and tighten the connector screws.

2.4 Note: Ensure the display setting does not exceed

1366 X 768 @ 60Hz.

3.Connecting power

Connect one end of the power cable to the monitor and

the other end to a power outlet.

4.Switching on

Switch on your computer.

You should now be able to see the picture. If not, see the

troubleshooting section of this guide.

- 2 -

POWER

D-SUB